The Ultimate in Safety & Security!
For the ultimate in safety and aesthetics look no further than an under coping track automatic pool cover system. These systems are designed to be installed on new pools. While primarily intended for installation on rectangle pools, there are ways to install the system on free form pools as well!
The under the coping track system is available for 6" radius & 2' radius corner rectangle pool kits with no steps or with our in the pool corner step. The under the coping system requires a little more ingenuity to install because the pool walls must remain parallel and squared. Each system includes a step by step manual and our toll-free technical support line. An automatic safety cover will increase your pools safety factor as well as allow the homeowner to save money on water and chemicals and save cleaning time. The heavy duty vinyl cover is available in 7 different colors. Auto-stop for safety. Non-corrosive pulleys and brackets.
- Can be used with an 8' diving board. Install the cover box a minimum of 10" or up to 24" from the pool's edge. Minimum set-back needs to be 10" so the cover's leading edge bar does not hang over the waters edge when the pool is open. Wheel assembly and leading edge bar rest 10" from front of aluminum lid.
- Includes heavy duty motor with Key Switch or Touchpad operation - please specify when ordering.
- Includes automatic cover pump to keep rain water off the cover.
|14' x 28'||$7395|
|16' x 32'||$7695|
|18' x 36'||$7995|
|20' x 40'||$8295|
This installation manual is a general guide and should not be solely used to install any automatic pool cover. Please use the installation manual included with your automatic pool cover for specific instructions on installation.
Automatic swimming pool covers are very intricate and complex systems. There are many moving parts and some wear items. Over time certain components such as gliders or ropes will need to be replaced, but with proper preventative maintenance, your cover system will last a very long time!
We offer automatic cover systems from leading manufacturer Automatic Pool Covers Inc. APC stands behind their products and has an excellent warranty. You may download the warranty card for APC below or read an overview about their warranty.
Automatic Pool Covers Inc warrants their cover fabric to be free from defects for 5 years. The mechanical components of the cover (not including the pulleys, guides, lead edge gliders or other custom items) are warrantied for 10 years. Electrical components of the system are warrantied for 3 years. If the system is hydraulically operated, there is a 3 year warranty on the hydraulic components.
These videos should answer most questions you have about using, caring for, or troubleshooting your Automatic Pool Cover. In addition, you will find valuable information about our swimming pool covers whether you are looking to purchase an automatic pool cover or already have one and need assistance.
If we do not have a video to answer your question, feel free to contact us using the "Get Customer Support" link located to the right of the screen.
Automatic Pool Cover Frequently Asked Questions:
All of these questions are answered in the Frequently Asked Questions video above.
"Can I walk on my automatic pool cover?"
"Is the cover too big?"
"If I drain my pool or if water level gets low, should I close the cover?"
"The cover is opening/closing crooked, what should I do?"
"Should I leave the cover pump on the cover at all times?"
"I hear a "popping noise" when I open and close the cover. Is this normal?"
"The cover does not open or close when I activate the controller. What should I check?"
"Water appears on my cover when it has not rained in days. What's wrong?"
"The cover stops half way opened or closed. What should I do?"
"The key-switch indicator light is blinking red. Is this normal?"
"The cover is completely open and will not close."
"The cover pump is not pumping off the water."