Royal Swimming Pools Hot Tubs, Saunas, Games, and More


5 Ways to Keep Your Swimming Pool Clean and Shimmering

Avoid the dreaded realization that your pool has been affected with algae or the chemical levels are all out whack with proper maintenance. Here are five ways to keep your pool clean all season long.

1. Use Prevention Products

With a few products you can prevent problems from starting in the first place. Keep these in your pool-cleaning bin so they’re always on hand when you need to clean.

  • Water clarifier: If you notice the water getting cloudy, use this product. It helps bind small particles to large ones, which are easier for your filter to handle. Follow the directions closely, as too high of a dose can actually worsen the problem.
  • Filter cleaner: At least twice a season, clean your filters. When you remove oily film and dirt your filter works more effectively.
  • Floc: These products help weigh bacteria and debris down so they’ll sink to the bottom. Once there, it’s easier for you to clean with a quick run of your pool vacuum.

2. Clean it Weekly

Sometimes it can feel like keeping your pool clean is a chore not worth the time. However, if you can set aside an hour or two every week, and build it into your evening or weekend routine, a weekly clean doesn’t seem so bad. From cleaning the pool cover to sampling the water, don’t miss a single step.

3. Keep it Balanced

Get into a habit of testing and balancing your pool water in specific increments.

Check pH levels daily, and balance the pool as needed. Your pH levels should be between 7.2 and 7.6. Any higher and the chlorine stops working, which makes the water more susceptible to algae. If the levels are too high, restore them with a dose of sodium ash, or sodium carbonate. Add this as is directed by the manufacturer.

Once a week, or every other week, check for total alkalinity (TA). When in a normal range, the TA helps stabilize the pH and prevents rapid changes in pH levels.

4. Chlorinate

Chlorine is a critical component in pool maintenance. The first step in chlorinating your pool is choosing the type of chlorine you want to use. You can choose from tabs, liquid and granules. Liquid chlorine has a shorter shelf life than other forms, while the granules can shock, chlorinate and kill algae at one time. Follow the manufacturer directions for how to use the product most effectively.

5. Perform Monthly Tests

Once a month, run a few tests on your pool to be sure your weekly methods are working and that your pool is safe for swimming. When you do, check for:

  • Calcium hardness
  • Filter cleanliness; these should only need to be cleaned every 2 to 4 months
  • Liner cleanliness; wipe down the sides and then vacuum to remove any particles

Basic pool maintenance ensures that your pool stays clean all season long. Use these five methods to avoid algae growth and cloudy water.

Share on Facebook3Tweet about this on TwitterPin on Pinterest0Share on Google+0Share on LinkedIn0Email this to someone


  1. Rob says:

    You’re right about trying to clean the pool once per week. I used to think of it as a real chore but now I will normally do it in the evenings and get some peace and quiet from the kids, and it doesn’t take that long if done regularly.

  2. ELpools says:

    The Content of the Blog is very Informative. I really like your Blog. Thanks for giving this information. I hope u will post more Blogs like this.

Leave a Reply

Your email address will not be published. Required fields are marked *

Customer Reviews