Swimming pool maintenance is very important because it helps your swimming pool to have a longer life span. Regular swimming pool maintenance ensures that the water is clean and safe to swim all the time.
The swimming pool had to be maintained regularly so that it can continue to be used for a long time. In order to maintain the pool, you have to install the filter system. The filter system eliminates the small particles in the water including dirt and contaminants. You should operate the filter system for about 8 – 12 hours per day. By filtering the water in the pool, there will be significantly less contaminant build up. If you don’t install the filtration system, the water will be dirty and unsafe to swim in. Dirty water encourages the growth of the algae. You can lengthen the life of the filtration system by adding sand or diatomaceous earth. You must frequently clean the filer so that oils and dirty particles can be removed from the filter.
The swimming pool must have the right water balance. The pH of the water can change after a period of time because of the repeat chemical treatment and the use of a filtration system. To make sure the water has the right pH, you must check the hardness, alkalinity and pH balance. The 3-1 test strips can be used to discover the pH balance of the water. You should use the test strips to check the pH balance of the water once or twice every week. The pH of the swimming pool water can range from 0 – 14. You should maintain the pH range of the water to in between 7 – 8. If your swimming pool is made from vinyl, the pH range of the water should be 7.6. If the pH readings of the water is 7.8, the water will become cloudy a dirty. The swimmer will feel uncomfortable when swimming in it. If the pH reading is lower than 7.2, the swimming pool is subject to corrosion problem.
You have to pay attention to the hardness of the water. The hardness refers to the amount of calcium and magnesium in the water. Soft water has a hardness level of 50 ppm. Hard water has a hardness of 300 ppm. For plaster pool, the average water hardness is 200 – 250 ppm. If the swimming pool is made from fiberglass, the water hardness is 175 – 225 ppm.
The homeowner must control the mineral content in the swimming pool. The conditions of the swimming pool can be maintained by controlling the level of iron, and copper content. If the water has a high level of iron and copper, the water will suffer from discoloration and become stained. When the water suffers from discoloration, it will change to other colors such as green, brown and black. The discoloration of the water is a reaction in between the chlorine sanitizer.
In addition, the water must be stabilized and sanitized. The water of the swimming pool is usually sanitized with chlorine. There are several types of chlorines. The economical chlorine is cheaper and comes in sticks or tablets form. The chlorine can be applied to the water every week. The chlorine sticks will not be affected by the sunlight. When applying the chlorine, make sure it remain on a level of 1 – 2 pp, so that all the germs can be killed.
Royalswimmingpools.com offers swimming pool maintenance equipments. There are a wide range of swimming pool maintenance equipments to choose from including automatic pool cleaner, chlorine, spa chemicals and etc.