#MM-KIT
Modern Moulding Styrofoam Form Coping for Vinyl Liner Pool Kit

• Assess the shape of the pool and determine whether you will need to bend the coping around corners or create 90° corners.
  

Step 2 - Install Forms in Liner Track

• Insert the forms into the liner track. Modern Moulding's forms are designed to wedge into the liner track, eliminating the need for two-way tape or tie-wire. This innovative design also ensures a secure fit and that there will be no debris to clean out of the track after the pour.

Step 3 - Insert Reusable Clips

• Insert the reuasable clips along the line and push them into the liner track. Rotate the clip 90° to lock it in. When you get to a joint, insert a clip and rotate it 45° to cover both forms and ensure maximum support. For best results, clips should be 10-12" apart around the curves and 8-10" apart where the pool is straight.
  

Step 4 - Ready to Pour Concrete

• Ready to pour! Remember to spray the forms with form release or cooking oil and remove all bending tape prior to pouring.
  

Step 5 - While Pouring Concrete

• Pour the concrete away from the coping and rake or shovel it into the coping form. Using a vibrating tool, vibrate around the coping for a smooth finish.
  

• Stripping the forms. Before the concrete has fully cured, unlock the clips and remove the coping forms. Using a damp sponge, smooth out the joints and edges.