#MM-KIT
Modern Moulding Styrofoam Form Coping for Vinyl Liner Pool Kit
Modern Moulding’s concrete foam foam cantilever pool coping system will revolutionize your next pool installation. This innovative system will cut hours off of your installation and cleanup time. With one of their coping kits, a standard pool can be set up and ready to pour in as little as one hour. We offer several profiles that allow for different edging profile designs.
Easy Installation!
Step 1 - Preparation
- Assess the shape of the pool and determine whether you will need to bend the coping around corners or create 90° corners.
Step 2 - Install Forms in Liner Track
- Insert the forms into the liner track. Modern Moulding's forms are designed to wedge into the liner track, eliminating the need for two-way tape or tie-wire. This innovative design also ensures a secure fit and that there will be no debris to clean out of the track after the pour.
Step 3 - Insert Reusable Clips
- Insert the reuasable clips along the line and push them into the liner track. Rotate the clip 90° to lock it in. When you get to a joint, insert a clip and rotate it 45° to cover both forms and ensure maximum support. For best results, clips should be 10-12" apart around the curves and 8-10" apart where the pool is straight.
Step 4 - Ready to Pour Concrete
- Ready to pour! Remember to spray the forms with form release or cooking oil and remove all bending tape prior to pouring.
Step 5 - While Pouring Concrete
- Pour the concrete away from the coping and rake or shovel it into the coping form. Using a vibrating tool, vibrate around the coping for a smooth finish.
Step 6 - Stripping the Forms
- Stripping the forms. Before the concrete has fully cured, unlock the clips and remove the coping forms. Using a damp sponge, smooth out the joints and edges.
Processing...
Fill out form below
No Questions asked yet! Ask the first question.